[Rhodes22-list] Chris Crispel - yada yada

michael meltzer mjm at michaelmeltzer.com
Fri Jan 25 07:39:58 EST 2008


What I had done on one of my boats, was have stan make a fiberglass tank,,
right in front of the forward form block, height followed the hull shape to
the top of the bunk base, and about 5 inches width, held 18+- gallions,

-mjm

-----Original Message-----
From: rhodes22-list-bounces at rhodes22.org
[mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of Rik Sandberg
Sent: Thursday, January 24, 2008 11:51 PM
To: The Rhodes 22 mail list
Subject: Re: [Rhodes22-list] Chris Crispel - yada yada

I wonder if one could cure the water tank issue by placing a flexible 
tank (or two for balance) in the bilge.

Rik

A learned blockhead is a greater blockhead than an ignorant one...
Benjamin Franklin



Chris Crispel wrote:
> Running from civilization huh!  You have no idea how beautiful this first 
> world (third world country) is until you visit.  But that aside, I want to

> make the Rhodes work if there is any way to do that.  I like your idea
about 
> extending the berth a foot.  That would certainly create an excellent 
> sleeping arrangement.  However, what I don't like is scratching the water 
> tank (need more water that what Stan traditionally has aboard) and another

> battery as well.
>
> So, you see, I want it all (isn't that unusual).
>
> Chris
> ----- Original Message ----- 
> From: "Tootle" <ekroposki at charter.net>
> To: <rhodes22-list at rhodes22.org>
> Sent: Thursday, January 24, 2008 3:05 PM
> Subject: [Rhodes22-list] Chris Crispel - yada yada
>
>
>   
>> Chris,
>>
>> A Fisher 37!  Wow, that is a nice boat, that is for crusing the oceans.
A
>> little problematic for coastal Cruising.
>>
>> Chris,
>>
>> I have two boats, the R22 for trailer sailing.  I can launch and retrieve

>> it
>> by my self.  I am a foot shorter than you so I can sleep ok in the cabin.
>> The way the boat comes I doubt that you could.
>>
>> If you get Stan to make you a new boat, consider that instead of a
battery
>> compartment and water tank under the V berth have him extend that area at
>> least one foot to allow for a tall guy sleeping.  You would not use the V
>> berth except for storage anyway.  This modification would still allow for
>> the powder room layout.  You would just have a funky shaped V berth.
>>
>> What Stan has said in his reply to you about modifications is that he 
>> makes
>> them every night.  What he really does is about 3 AM is to go out in the
>> plant to see what was done the day before and what has to be done during
>> that day.  Then he lays his hands on something and they just go to 
>> fiddling.
>> The next day he tells Ditto or Mark to change something or even has
Calvin
>> change a mold... The Rhodes 22 does in fact change every night.  I have 
>> seen
>> it with me own eyes!
>>
>> So, it is reasonable to extend the the bunk to allow for your size.  He 
>> just
>> has not seriously looked into that modification for you alone...
>>
>> I also have another old boat.  It is an O'Day 26.  It was the sucessor to
>> the O'Day 25 which started production in 1974.  The hull is in many ways
>> similar to the R 22 in design.  That is it has a stubby keel with
>> centerboard therein.  Draft is about 30" with board up.  It is not quite 
>> as
>> trailerable as the R 22 but potentially if Stan ever rubbed his hands on 
>> it,
>> it might be.  Unfortunately, O'Day went belly up in 1986.
>>
>> However, there are a number of O'Day 25's around and on the market.  They
>> only made the 26 a couple of years near the end.  Inside there is 5' 9'
>> headroom.  But on the 26 there is adequate bunk space to fit you.
>>
>> This is why you need to move to Edenton and learn how to make a one off
>> under Stan's direction of his hull.  He will not sell the one hull he
has,
>> it is still his dream boat.  The problem with making more 27 foot hulls
is
>> the cost of making a mold.  Stan know how to do that.
>>
>> If you had a mold, I know of a reliable company that would make the hull 
>> and
>> deck using vacuum bagging.  Once you had that, Stan could finish the
boat.
>>
>> An issue with a bigger boat is sail size.  While Stan's IMF mast come
from
>> the foundry about 30 foot long, the inside will not accomodate a bigger
>> sail.  If you wanted IMF and a 30 foot mast, you would need a different
>> mast.  However, since Stan's mast can only have a short boom, maybe you
>> could make a schooner with two IMF mast?  Or at least a 27 foot ketch?
>>
>> What I am telling you, instead of going to Panama, and running from
>> civilization, go to Edenton and build your own boat...  Stan needs the
>> challange...
>>
>> Ed K
>> Greenville, SC, USA
>> "Life hangs on a very thin thread and the cancer of time is complacency. 
>> If
>> you are going to do something, do it now.  Tomorrow is too late. -"-
Peter
>> Goss
>>
>>
>>
>>
>>
>>
>>
>>
>> Tootle wrote:
>>     
>>> Chris,
>>>
>>> Welcome to the Rhodes List.  Now, just who are you?  And where ya be? 
>>> And
>>> why ya here?
>>>
>>> Ed K
>>> Greenville, SC, USA
>>> fishin' is like a box of chocolate.. u never no what your gonna catch..
>>> and sometimes you catch nothing! Unattributed
>>>
>>>
>>>       
>> -- 
>> View this message in context: 
>> http://www.nabble.com/Chris-Crispel-tp15022481p15077292.html
>> Sent from the Rhodes 22 mailing list archive at Nabble.com.
>>
>> __________________________________________________
>> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list 
>>     
>
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>
>   
__________________________________________________
Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list



More information about the Rhodes22-list mailing list