[Rhodes22-list] Michael W.s Tongue

[Brad Haslett]

Mike,

Drag it down to Gulfport and bring a case of beer, we'll have it done cheap
before the beer is gone!  OK, so maybe that isn't feasible.  The tubing is
standard stock, and even with the current steel prices, it will be a whole
lot cheaper than a new trailer.  Any local welding shop should be able to
handle the job.  Theirs will not be as fun a place to hang around as ours!

Brad

On Jan 31, 2008 6:54 PM, Arthur H. Czerwonky <czerwonky at earthlink.net>
wrote:

> Mike,
> Ed makes a good point.  I have never used a trailer with internal
> extension, never will because it will make the key joints weaker.  Instead I
> use a completely independent 3x3 steel bar - fits into the receiver on one
> end and has the ball mounted on the other. Mine is 60" long.  Mounted on
> front(preferred) or back of my Explorer it handles very well.  I wouldn't
> trust any older painted Triad extensions I have seen, especially if they
> have been repainted over hidden problems.
> Art
>
> -----Original Message-----
> >From: Tootle <ekroposki at charter.net>
> >Sent: Jan 31, 2008 8:18 AM
> >To: rhodes22-list at rhodes22.org
> >Subject: [Rhodes22-list]  Michael W.s Tongue
> >
> >
> >Mike:
> >
> >I think that when under load all extensions bend.  Maybe your bending is
> >excessive?
> >
> >Go buy a piece of I beam long enough to reach from trailer hitch to
> >somewhere back on trailer that allows for physical attachment to main
> >trailer chassis.  Get about four large U-bolts with cross pieces and bolt
> >the whole thing to extended extension and actual trailer chassis.  Just
> like
> >you were sistering a plank supporting a house?  I guess you could even
> use a
> >wood 4 x 4 about 12 feet long and make it work for the occasion.  But
> that
> >might be too thick to get down a ramp.
> >
> >Locate a steep ramp that does not require extension.  When lake level is
> up
> >here at Hartwell there are many that you do not need extensions on.
> >
> >Ed K
> >Greenville, SC, USA
> >"Stainless steel's resistance to corrosion relies on exposure to oxygen
> in
> >the air or water.  When you tape a stainless steel turnbuckle or rigging
> >terminal, you deprive it of oxygen, and the metal is more prone to
> >corrosion."  Bill Seifert
> >
> >
> >
> >
> >
> >--
> >View this message in context:
> http://www.nabble.com/Michael-W.s-Tongue-tp15204437p15204437.html
> >Sent from the Rhodes 22 mailing list archive at Nabble.com.
> >
> >__________________________________________________
> >Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>