[Rhodes22-list] Hull Dimension for Letters

[cowie]

Thanks to all for the input.  I had not taken into account the flared hull
and will reduce the letter size a bit to accommodate and will play around
with the alignment to the waterline and location when the boat arrives.



Rob Lowe wrote:
> 
> Cowie,
> I thinking 5 might be a better option just because I have a fender
> hanging from the starboard stern rail right where 6 is centered that
> would either obscure or mar the lettering.  But that's just me because
> my slip has the dock on my starboard side.  But something to consider. -
> rob
>    
> 
> -----Original Message-----
> From: rhodes22-list-bounces at rhodes22.org
> [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of cowie
> Sent: Friday, February 06, 2009 10:40 AM
> To: rhodes22-list at rhodes22.org
> Subject: Re: [Rhodes22-list] Hull Dimension for Letters
> 
> 
> let me try and post both otpions 5 and 6
> 
> 
> 
> cowie wrote:
>> 
>> Thanks for the photo and dimensions, that's a big help.
>> 
>> Caesar:
>> 
>> I hope you don't mind I borrowed your boat photo to use as a
> background to
>> test my name layout.  You have a very good looking boat.  My boat is
> due
>> to arrive this April so I am currently living out my Rhodes experience
>> vicariously through your photos and posts.
>> 
>> Enclosed are two options for the name placement, any votes for name_05
> or
>> name_06?
>> 
>> 
>> 
>> 
>> cjlowe-2 wrote:
>>> 
>>>> I'll try the picture one more time.When I measured,I included the
> curve
>>> of the flare all the way to the aluminum rub-rail
>>> 
>>> Jerry Lowe
>>> 
>>> 
>>> On my '86,straight down from the forward stanchion of the stern rail
> (I
>>>> don't
>>>> have the captains seats )I measured 19" to the top of the boot
>>>> stripe,which
>>>> is 2" wide and then another inch of gelcoat before the bottom
>>>> paint.Thirty
>>>> inches forward,about 6" forward of the winch,you gain another inch
> to
>>>> 20"
>>>> or
>>>> 23" to the bottom paint. Hopefully ,there is a picture below.
>>>>
>>>> Jerry Lowe
>>>>
>>>> PS: This is Rik's work, also.
>>>>
>>>>
>>>>  cowie <ccowie at cowieassociates.com> wrote:
>>>>>
>>>>> I am ready to have Rik fabricate my boat name but want to make sure
> my
>>>>> assumption for the hull size is correct.  Does anyone know the
> height
>>>>> from
>>>>> the bottom of the rub rail to the top of the water line?  I am
> assuming
>>>> this
>>>>> is about 21" in height for the area between the cabin bulkhead and
> the
>>>>> rear
>>>>> rail stanchion.  Enclosed is the placement and size I am ready to
> have
>>>>> Rik
>>>>> fabricate if my 21" assumption is correct.
>>>>> http://www.nabble.com/file/p21856467/NAME_05.pdf NAME_05.pdf
>>>>> http://www.nabble.com/file/p21856467/NAME_06.pdf NAME_06.pdf
>>>>> --
>>>>> View this message in context:
>>>>>
> http://www.nabble.com/Hull-Dimension-for-Letters-tp21856467p21856467.htm
> l
>>>>> Sent from the Rhodes 22 mailing list archive at Nabble.com.
>>>>>
>>>>> __________________________________________________
>>>>> To subscribe/unsubscribe or for help with using the mailing list go
> to
>>>>> http://www.rhodes22.org/list
>>>>> __________________________________________________
>>>>>
>>>>
>>>> __________________________________________________
>>>> To subscribe/unsubscribe or for help with using the mailing list go
> to
>>>> http://www.rhodes22.org/list
>>>> __________________________________________________
>>>>
>>> -------------- next part --------------
>>> A non-text attachment was scrubbed...
>>> Name: boat name.jpg
>>> Type: image/pjpeg
>>> Size: 1853937 bytes
>>> Desc: not available
>>> Url :
>>>
> http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20090205/c4e
> a876e/attachment.jpg 
>>> __________________________________________________
>>> To subscribe/unsubscribe or for help with using the mailing list go
> to
>>> http://www.rhodes22.org/list
>>> __________________________________________________
>>> 
>>> 
>>  http://www.nabble.com/file/p21874864/name_05.pdf name_05.pdf 
>> 
> http://www.nabble.com/file/p21874912/name_05.pdf name_05.pdf 
> http://www.nabble.com/file/p21874912/name_06.pdf name_06.pdf 
> -- 
> View this message in context:
> http://www.nabble.com/Re%3A-Hull-Dimension-for-Letters-tp21862226p218749
> 12.html
> Sent from the Rhodes 22 mailing list archive at Nabble.com.
> 
> __________________________________________________
> To subscribe/unsubscribe or for help with using the mailing list go to
> http://www.rhodes22.org/list
> __________________________________________________
> 
> __________________________________________________
> To subscribe/unsubscribe or for help with using the mailing list go to
> http://www.rhodes22.org/list
> __________________________________________________
> 
> 

-- 
View this message in context: http://www.nabble.com/Re%3A-Hull-Dimension-for-Letters-tp21862226p21876371.html
Sent from the Rhodes 22 mailing list archive at Nabble.com.