[Rhodes22-list] Hull Dimension for Letters

Caesar Paul caesarpaul01 at yahoo.com
Fri Feb 6 12:51:36 EST 2009


Cowie,
I like option # 6 better.  To me it gives the top side, and boat a more elegant look.
Caesar


--- On Fri, 2/6/09, cowie <ccowie at cowieassociates.com> wrote:

From: cowie <ccowie at cowieassociates.com>
Subject: Re: [Rhodes22-list] Hull Dimension for Letters
To: rhodes22-list at rhodes22.org
Date: Friday, February 6, 2009, 7:39 AM

let me try and post both otpions 5 and 6



cowie wrote:
> 
> Thanks for the photo and dimensions, that's a big help.
> 
> Caesar:
> 
> I hope you don't mind I borrowed your boat photo to use as a
background to
> test my name layout.  You have a very good looking boat.  My boat is due
> to arrive this April so I am currently living out my Rhodes experience
> vicariously through your photos and posts.
> 
> Enclosed are two options for the name placement, any votes for name_05 or
> name_06?
> 
> 
> 
> 
> cjlowe-2 wrote:
>> 
>>> I'll try the picture one more time.When I measured,I included
the curve
>> of the flare all the way to the aluminum rub-rail
>> 
>> Jerry Lowe
>> 
>> 
>> On my '86,straight down from the forward stanchion of the stern
rail (I
>>> don't
>>> have the captains seats )I measured 19" to the top of the
boot
>>> stripe,which
>>> is 2" wide and then another inch of gelcoat before the bottom
>>> paint.Thirty
>>> inches forward,about 6" forward of the winch,you gain another
inch to
>>> 20"
>>> or
>>> 23" to the bottom paint. Hopefully ,there is a picture below.
>>>
>>> Jerry Lowe
>>>
>>> PS: This is Rik's work, also.
>>>
>>>
>>>  cowie <ccowie at cowieassociates.com> wrote:
>>>>
>>>> I am ready to have Rik fabricate my boat name but want to make
sure my
>>>> assumption for the hull size is correct.  Does anyone know the
height
>>>> from
>>>> the bottom of the rub rail to the top of the water line?  I am
assuming
>>> this
>>>> is about 21" in height for the area between the cabin
bulkhead and the
>>>> rear
>>>> rail stanchion.  Enclosed is the placement and size I am ready
to have
>>>> Rik
>>>> fabricate if my 21" assumption is correct.
>>>> http://www.nabble.com/file/p21856467/NAME_05.pdf NAME_05.pdf
>>>> http://www.nabble.com/file/p21856467/NAME_06.pdf NAME_06.pdf
>>>> --
>>>> View this message in context:
>>>>
http://www.nabble.com/Hull-Dimension-for-Letters-tp21856467p21856467.html
>>>> Sent from the Rhodes 22 mailing list archive at Nabble.com.
>>>>
>>>> __________________________________________________
>>>> To subscribe/unsubscribe or for help with using the mailing
list go to
>>>> http://www.rhodes22.org/list
>>>> __________________________________________________
>>>>
>>>
>>> __________________________________________________
>>> To subscribe/unsubscribe or for help with using the mailing list
go to
>>> http://www.rhodes22.org/list
>>> __________________________________________________
>>>
>> -------------- next part --------------
>> A non-text attachment was scrubbed...
>> Name: boat name.jpg
>> Type: image/pjpeg
>> Size: 1853937 bytes
>> Desc: not available
>> Url :
>>
http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20090205/c4ea876e/attachment.jpg

>> __________________________________________________
>> To subscribe/unsubscribe or for help with using the mailing list go to
>> http://www.rhodes22.org/list
>> __________________________________________________
>> 
>> 
>  http://www.nabble.com/file/p21874864/name_05.pdf name_05.pdf 
> 
http://www.nabble.com/file/p21874912/name_05.pdf name_05.pdf 
http://www.nabble.com/file/p21874912/name_06.pdf name_06.pdf 
-- 
View this message in context:
http://www.nabble.com/Re%3A-Hull-Dimension-for-Letters-tp21862226p21874912.html
Sent from the Rhodes 22 mailing list archive at Nabble.com.

__________________________________________________
To subscribe/unsubscribe or for help with using the mailing list go to
http://www.rhodes22.org/list
__________________________________________________


More information about the Rhodes22-list mailing list