[Rhodes22-list] Boat Name Letter size and placement

[Leland]

Jerry,

Check out the last three pictures:

http://http://www.msnusers.com/Rhodes22-AtEase/shoebox.msnw?albumlist=2
http://http://www.msnusers.com/Rhodes22-AtEase/shoebox.msnw?albumlist=2 

Boat Name:  Those are 8 inch letters.  I'd recommend 6 inch or less.

Transom Home Port:  I thought the transom was crowded, so I just stuck a
Kent Island sticker on it.

Registration Numbers:  Looked like a good place to put the registration
numbers, fishing decal, and safety inspection decal.

Good luck!

Lee
1986 Rhodes22  At Ease
Kent Island, MD



cowie wrote:
> 
> I am getting ready to order some graphics from signs by Rik for Opus my
> new R22 and need to decide on the placement, size and content.  I am
> leaning toward "Opus" on the starboard and port aft quarter centered
> between the water line and rub rail.  Does anyone know the vertical
> distance from the water line to the rub rail?  This would allow me to do a
> mock up in order to determine the exact letter height.  I also notice
> several options on were to locate the boat numbers and prefer on the hull
> not the cabin top.  My hull is navy blue and I am considering white
> letters.  Does anyone include the port of call on the transom or is this
> area too cluttered?  Enclosed are some photo shop images were I have taken
> the liberty to borrow some R22 photos off the internet in order to explore
> boat name, number and port of call placement.  
> 
>  http://www.nabble.com/file/p21710214/NAME_02.jpg 
> 
>  http://www.nabble.com/file/p21710214/NAME_03.jpg 
> 
>  http://www.nabble.com/file/p21710214/P1010113-1.jpg 
> 
>  http://www.nabble.com/file/p21710214/picrhodes22ca.jpg 
> 

-- 
View this message in context: http://www.nabble.com/Boat-Name-Letter-size-and-placement-tp21710214p21713202.html
Sent from the Rhodes 22 mailing list archive at Nabble.com.