[Rhodes22-list] Grand kids & Drying out the keel cavities

[The Rhodes 22 Email List]

Good idea Rummy. I just need to think of something she can do from her high
chair.

Graham 

-----Original Message-----
From: rhodes22-list-bounces at rhodes22.org
[mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 Email
List
Sent: August-04-14 7:18 AM
To: rhodes22-list at rhodes22.org
Subject: [Rhodes22-list] Grand kids & Drying out the keel cavities

Graham,
I think you are missing out on a real opportunity here. Put the grand kids
to work.
 
Rummy
 
 
In a message dated 8/3/2014 3:47:48 P.M. Eastern Daylight Time,
rhodes22-list at rhodes22.org writes:

Dennis:

It just means that while working on the boat I had  to give up playing the
piano with my left hand. 

What really brings  me to a halt is having grandkids here for the weekend.

Graham  


-----Original Message-----
From:  rhodes22-list-bounces at rhodes22.org
[mailto:rhodes22-list-bounces at rhodes22.org]  On Behalf Of The Rhodes 22
Email List
Sent: August-02-14 12:38 PM
To:  'The Rhodes 22 Email List'
Subject: Re: [Rhodes22-list] Drying out the keel  cavities

Using a shop vac as a heater... who would have  thought?

"I gave myself a nasty cut with the band saw and that is  slowing me down" -
followed immediately by "I plugged the holes in the sole  of the boat and
drilled drain holes at the bottom of the keel and then  adjusted the boat
fore and aft so that the bottom of the keel was  horizontal. I then made an
adapter from plumbing bits and pieces and shop  vac parts that I then
inserted into voids on both sides of the keel like a  stethoscope, attached
it to the blower side of the vac..."

Your pace  while working one handed is making me look bad Graham. 

Dennis
Magic  Moments
Bobbing around in Lake Erie


-----Original  Message-----
From:  rhodes22-list-bounces at rhodes22.org
[mailto:rhodes22-list-bounces at rhodes22.org]  On Behalf Of The Rhodes 22
Email List
Sent: Saturday, August 02, 2014  11:40 AM
To: 'The Rhodes 22 Email List'
Subject: Re: [Rhodes22-list]  Drying out the keel cavities

For those who are dying to know how the  process of drying out the keel is
going, I thought I would post a couple of  pictures showing what I am doing.


I plugged the holes in the sole of  the boat and drilled drain holes at the
bottom of the keel and then  adjusted the boat fore and aft so that the
bottom of the keel was  horizontal. I then made an adapter from plumbing
bits and pieces and shop  vac parts that I then inserted into voids on both
sides of the keel like a  stethoscope, attached it to the blower side of the
vac and turned it on.  The point of the double sided adapter was simply to
allow more air in and  to do both sides at the same time. 

Water started dripping from several  holes immediately  


__________________________________________________
To  subscribe/unsubscribe go  to
http://www.rhodes22.org/mailman/listinfo/rhodes22-list

For the  list Charter and help with using the mailing list and archives go
to http://www.rhodes22.org/list
__________________________________________________

__________________________________________________
To  subscribe/unsubscribe go to
http://www.rhodes22.org/mailman/listinfo/rhodes22-list

For the list  Charter and help with using the mailing list and archives go
to  http://www.rhodes22.org/list
__________________________________________________

__________________________________________________
To subscribe/unsubscribe go to
http://www.rhodes22.org/mailman/listinfo/rhodes22-list

For the list Charter and help with using the mailing list and archives go to
http://www.rhodes22.org/list
__________________________________________________