[Rhodes22-list] Boom coming loose from the mast

The Rhodes 22 Email List rhodes22-list at rhodes22.org
Sun Jul 26 07:55:57 EDT 2015


Thanks, Richard.  We've had the same problem--you have a good solution.

Steve
Granville, OH

-----Original Message-----
From: rhodes22-list-bounces at rhodes22.org
[mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 Email
List
Sent: Saturday, July 25, 2015 12:25 AM
To: The Rhodes 22 Email List
Subject: Re: [Rhodes22-list] Boom coming loose from the mast

This also happened twice on my R22
Stan was surprised that it occurred and recurred.  But the boom has remained
secure for two sailing seasons since I replaced both the lockout and the
bolt with a  stainless steel aviation grade (AN) bolt and (AN) castle nut.
(AN) bolts have a hole drilled  through the threaded shafts diameter near
the threaded end of the bolt.  When the bolt is threaded through whatever it
is to secure and the castle nut is screwed on until it is between the bolt
head and the drilled bolt shaft hole, a stainless steel cotter pin is
inserted through the bolt staff's hole , preventing the castle nut from
unscrewing itself.  Of course the above would be instantly clear to you with
a few photos but I am away from home with none to send till later in the
week, along with hardware sizes and dimensions used..
Try looking for AN ss bolts and castle nuts in AircraftSpruce.com and
Wicksaviation.com or Wicks.com- these catalogues should have photos, as I
recall.  This repair can only be done with the mast down so you are able to
slide the black -plastic-block -inside- the -mast- assembly out of the foot
of the now horizontal mast.  I lost a month of sailing season before last
with the mast down while ordering and reordering AN bolts  til I got one
just right-difficulty was finding a bolt with right length and with the
cotter pin hole in just the right spot. You will save much time and trouble
if you are able to drill a cotter pin hole through you existing bolt- then
you need purchase only a castle nut.
Richard Arking
Gateway Marina, Brooklyn NY
On Jul 24, 2015 12:03 PM, "The Rhodes 22 Email List" <
rhodes22-list at rhodes22.org> wrote:

> I've had a problem this year with the bolt which holds the boom to the 
> mast coming loose. My recycled Rhodes is less than a year old. About 6 
> weeks ago I discovered the boom had come loose from the mast. There is 
> a bolt that goes through a bracket and through the block on the mast 
> and has a lock nut on the back side -- very difficult to get to 
> because you only have a slot in the block where the furling line goes 
> through. Because I didn't find my locking nut right away, I replaced 
> it with a new one. This one has come loose two more times since then. 
> Maybe I'm not tightening it enough, but I don't know how to get any 
> leverage on the nut which is very difficult to get to. Seems like it 
> now takes only 2-3 weeks of vibrations for the lock nut to come loose! 
> Anyone else have this problem? Maybe I need to find a better lock nut.
>
> Bob
>
>
>
> -----
> Bob Weiss
> Beach Spring
> 1998 Rhodes 22 Recycled in 2014
> --
> View this message in context:
> http://rhodes-22.1065344.n5.nabble.com/Boom-coming-loose-from-the-mast
> -tp50472.html Sent from the Rhodes 22 mailing list archive at 
> Nabble.com.
> __________________________________________________
> To subscribe/unsubscribe go to
> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>
> For the list Charter and help with using the mailing list and archives 
> go to http://www.rhodes22.org/list 
> __________________________________________________
>
__________________________________________________
To subscribe/unsubscribe go to
http://www.rhodes22.org/mailman/listinfo/rhodes22-list

For the list Charter and help with using the mailing list and archives go to
http://www.rhodes22.org/list
__________________________________________________


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus



More information about the Rhodes22-list mailing list