[Rhodes22-list] Navigation lights

The Rhodes 22 Email List rhodes22-list at rhodes22.org
Sun Sep 13 20:24:56 EDT 2015 

Ted:

Thanks for the links. Is the bow light attached to a bracket welded on to
the bow pulpit?
Graham

-----Original Message-----
From: rhodes22-list-bounces at rhodes22.org
[mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 Email
List
Sent: September 13, 2015 5:47 PM
To: The Rhodes 22 Email List
Subject: Re: [Rhodes22-list] Navigation lights

Graham,

My General Boats recycled 1991/2013 came with these led lights on the stern
and bow, respectively. 

http://www.westmarine.com/buy/west-marine--round-flush-mount-led-stern-light
--13022173

http://www.westmarine.com/buy/west-marine--bi-color-bow-lights--15761570

The masthead (steaming) 225 degree light is a non led, perko light I think.

I wish it had a 365 degree led anchor light, but it think the masthead light
is a 225 degree steaming light only. Right now it's not working so I need to
drop the mast and check out why it's not working. Even more reason to switch
it out with LED. 

Cheers,
Ted






> On Sep 13, 2015, at 9:54 AM, The Rhodes 22 Email List
<rhodes22-list at rhodes22.org> wrote:
> 
> I am wondering how newer Rhodes are equipped with navigation lights or 
> if anyone has any strong preferences for lights. My 76 had the red and 
> green lights mounted on the cabin sides back at the cockpit rather 
> than near the bow. Is that still the case or have they been moved 
> forward to the bow? Has anyone installed a masthead tricolor light? 
> LED lights seem sensible but are they worth the added expense? Any
recommendations would be welcome.
> 
> 
> Graham Stewart
> Agile. R22, 1976
> Kingston Ontario Canada
> 
> 
> 
> 
> -----Original Message-----
> From: rhodes22-list-bounces at rhodes22.org
> [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 
> Email List
> Sent: September 12, 2015 6:32 PM
> To: 'The Rhodes 22 Email List'
> Subject: Re: [Rhodes22-list] Bilge ventilation
> 
> Larry:
> I used white oak and epoxy when I rebuilt my 20' mahogany runabout to 
> replace rotted ribs and bottom. White oak is resistant to rot but not 
> impervious as the original wood ribs were white oak as well and 
> eventually rotted albeit over a 40 year period. The big advantage 
> using white oak is that it is amazing wood to steam bend. It is hard 
> as rock when dry but after steaming for a while thin strips can be 
> bent by hand easily. That makes it perfect for steam-bent ribs.
> 
> Hopefully the epoxy will prohibit rot that only works if the epoxy 
> totally encapsulates the wood with no cuts gouges or holes in the 
> wood. In my case the epoxy also bonded the ribs to mahogany ply that 
> was used to cold mold the new bottom. That combination made for an 
> incredibly strong, solid, dry and relatively light boat.
> 
> For the Rhodes floor, however, white oak is expensive and I would be 
> inclined to use something that did not depend on the epoxy to be 
> perfectly sealed. Pressure treated seems like the easiest, cheapest 
> and most certain material to use. I will still use epoxy to bond it in 
> place. Before I bought my Rhodes the previous owner rebuilt the floor 
> structure using pressure treated fence boards. They lasted for more 
> than 20 years with no sign of rot. The problem with using fence boats 
> is that they are only .5 inch thick and that did not give a 
> sufficiently wide edge for the floor boards to be screwed down. I was 
> also unhappy with where they were located so I tore it all out to be 
> replaced with thicker stock. I will no doubt be kicking myself for 
> that as tearing things out is so much easier than putting it all back 
> in
> - a realization that weighs more heavily as I consider that it was not 
> really necessary except to feed my obsessive nature.
> 
> 
> Graham Stewart
> Agile. R22, 1976
> Kingston Ontario Canada
> 
> 
> 
> 
> -----Original Message-----
> From: rhodes22-list-bounces at rhodes22.org
> [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 
> Email List
> Sent: September 12, 2015 1:47 PM
> To: 'The Rhodes 22 Email List'
> Subject: Re: [Rhodes22-list] Bilge ventilation
> 
> When we rebuilt the floor and stringers, we used White Oak stringers 
> and expoxied them.
> 
> Larry Allen
> Makai
> Sarasota
> 
> -----Original Message-----
> From: rhodes22-list-bounces at rhodes22.org
> [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 
> Email List
> Sent: Saturday, September 12, 2015 11:11 AM
> To: 'The Rhodes 22 Email List'
> Subject: Re: [Rhodes22-list] Bilge ventilation
> 
> Bob:
> 
> Best and crucial solution is to stop the leaks. I have gone to 
> ridiculous lengths to do that by glassing the hull-heck joint and 
> installing full acrylic window coverings to replace all ports.
> 
> I am not sure that ventilation alone would preclude rot over time if 
> the bilge is not dry otherwise. I plan to rebuild the floor and 
> stringers with rot resistant materials - I will probably use pressure 
> treated pine for the structural pieces. That said, ventilation still 
> serves a purpose in terms of mold and mildew etc.
> 
> I have installed a solar vent that should keep air moving in the boat. 
> The bilge is hardly air tight at the best of time and, so long as 
> water is not getting in, good cabin ventilation should be sufficient 
> to move air through the bilge. For long periods and during the winter 
> when the solar vent may not be operating I will leave the floor access
panels open.
> 
> 
> 
> Graham Stewart
> Agile. R22, 1976
> Kingston Ontario Canada
> 
> 
> 
> 
> -----Original Message-----
> From: rhodes22-list-bounces at rhodes22.org
> [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 
> Email List
> Sent: September 11, 2015 7:54 PM
> To: The Rhodes 22 Email List
> Subject: [Rhodes22-list] Bilge ventilation
> 
> Has anyone installed vent holes or even active ventilation under the 
> floor to prevent the stringers and floor from rotting out?
> 
> Bob (palatka)
> __________________________________________________
> To subscribe/unsubscribe go to
> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> 
> For the list Charter and help with using the mailing list and archives 
> go to http://www.rhodes22.org/list 
> __________________________________________________
> 
> __________________________________________________
> To subscribe/unsubscribe go to
> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> 
> For the list Charter and help with using the mailing list and archives 
> go to http://www.rhodes22.org/list 
> __________________________________________________
> 
> 
> __________________________________________________
> To subscribe/unsubscribe go to
> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> 
> For the list Charter and help with using the mailing list and archives 
> go to http://www.rhodes22.org/list 
> __________________________________________________
> 
> __________________________________________________
> To subscribe/unsubscribe go to
> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> 
> For the list Charter and help with using the mailing list and archives 
> go to http://www.rhodes22.org/list 
> __________________________________________________
> 
> __________________________________________________
> To subscribe/unsubscribe go to 
> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> 
> For the list Charter and help with using the mailing list and archives 
> go to http://www.rhodes22.org/list 
> __________________________________________________
__________________________________________________
To subscribe/unsubscribe go to
http://www.rhodes22.org/mailman/listinfo/rhodes22-list

For the list Charter and help with using the mailing list and archives go to
http://www.rhodes22.org/list
__________________________________________________

More information about the Rhodes22-list mailing list