[Rhodes22-list] Chainplates and handrails installed

Mon Sep 21 19:07:23 EDT 2015

Looks awesome Graham!!'

Bob (palatka)

> On Sep 21, 2015, at 4:12 PM, The Rhodes 22 Email List <rhodes22-list at rhodes22.org> wrote:
> 
> I just completed installing the new lower chainplates and cabin handrails
> and attach some photos for those  who might be interested in these projects.
> 
> I removed the lower chainplates by grinding out a fairly large area and then
> filled the space with epoxy and sawdust. This created a very solid core that
> gave what I hope and expect will be a good place for the new forged eye
> bolts that I am using as the new lower chainplates that bolt through the
> cabin top. They are sealed with butyl. They cost about $14 each in Canada -
> about double the price in the US.
> 
> I replaced the original teak handrails with and 18" and a 24" rail on each
> side. I also installed 9" handrails at the front of the cockpit. They are
> thru-bolted and sealed with butyl after filling the hole with epoxy and
> thickener. The six rails cost about $120 Canadian. They should be
> maintenance free and, I think, look good with the new windows.
> 
> Butyl, aside for its excellent qualities as a sealant, is also wonderful to
> work with. Given that I do everything a minimum of two times (if I am lucky)
> and in the case of the handrail installation, multiple times, it was
> remarkably easy to remove the rails and clean up the butyl left behind.
> Butyl sticks poorly to everything except itself. As a result you don't need
> to mask the area as you can just lift off the butyl that squeezes onto the
> deck. To get the tiny bits you can just dab them with a ball of butyl. No
> gloves needed. Butyl never hardens so you have no time limits around
> installation of cleanup. I can't imagine doing this task with sealant. 
> 
> The deck looks white in the photo but actually it is an off-white on the
> brown side (System Three Whidby white). 
> 
> Next job, if I can get to it before it gets too cold, is to paint the
> non-skid areas with Kiwigrip. Then, time permitting, will be the rest of the
> deck hardware.
> 
> 
> Graham Stewart
> Agile. R22, 1976
> Kingston Ontario Canada
> 
> 
> 
> 
> -----Original Message-----
> From: rhodes22-list-bounces at rhodes22.org
> [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 Email
> List
> Sent: September 15, 2015 11:57 AM
> To: 'The Rhodes 22 Email List'
> Subject: Re: [Rhodes22-list] Electrical help- nav light anchor light combo
> 
> Ted,
> 
> The diagram shows that you can hook the light up to a single switch that
> will be three positions, Front only, Both, or all off.
> 
> This switch would work perfectly.
> http://www.ebay.com/itm/6Pin-DPDT-ON-OFF-ON-3-Position-Snap-Boat-Rocker-Swit
> ch-6A-250V-10A-125V-AC-/291287946050?hash=item43d21d5342
> 
> Hook your power to both the center pins. 
> Then hook the white wire to 1a and 1b (marked on the side of the switch).
> Finally, connect the grey wire to 2b.
> 
> Set up this way, the forward light will be lit when the switch is set to the
> single dash, and will have both lights lit when the rocker is moved to the
> two dash position.
> 
> James
> 1971 Rhodes Continental, Still unnamed.
> 
> -----Original Message-----
> From: rhodes22-list-bounces at rhodes22.org
> [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 Email
> List
> Sent: Friday, September 18, 2015 11:50 AM
> To: Da List <rhodes22-list at rhodes22.org>
> Subject: [Rhodes22-list] Electrical help- nav light anchor light combo
> 
> So, I am trying to figure out the best way to wire my nav lights and anchor
> light. It turns out my factory installed perko masthead light is both a
> steaming light and a anchor light. Who knew?!? When I turn on the masthead
> light on the circuit panel it only turns on the front steaming light part. 
> 
> I always just thought it was just a steaming light. However, it is not wired
> with a switch to turn on the rear anchor light. Not to my knowledge anyway.
> See perko wiring instructions. 
> 
> http://www.perko.com/images/catalog/pdf/Figs%201181&84%20Inst%20(1181INS1).p
> df
> 
> So I take it I need to wire in a switch to control both?
> 
> How do you guys have your setup?
> 
> Cheers,
> Ted
> 
> 
> __________________________________________________
> To subscribe/unsubscribe go to
> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> 
> For the list Charter and help with using the mailing list and archives go to
> http://www.rhodes22.org/list
> __________________________________________________
> 
> __________________________________________________
> To subscribe/unsubscribe go to
> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> 
> For the list Charter and help with using the mailing list and archives go to
> http://www.rhodes22.org/list
> __________________________________________________
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: Filling lower shroud holes.jpg
> Type: image/jpeg
> Size: 69382 bytes
> Desc: not available
> Url : http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150921/93c0abeb/attachment.jpg 
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: Blue wave forged eye bolts for lower chainplates.jpg
> Type: image/jpeg
> Size: 7070 bytes
> Desc: not available
> Url : http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150921/93c0abeb/attachment-0001.jpg 
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: Forged eyebolts installed for lower chainplates.jpg
> Type: image/jpeg
> Size: 35200 bytes
> Desc: not available
> Url : http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150921/93c0abeb/attachment-0002.jpg 
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: Handrails and chainplates installed (4).jpg
> Type: image/jpeg
> Size: 64498 bytes
> Desc: not available
> Url : http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150921/93c0abeb/attachment-0003.jpg 
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: Handrails and chainplates installed (2).jpg
> Type: image/jpeg
> Size: 195024 bytes
> Desc: not available
> Url : http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150921/93c0abeb/attachment-0004.jpg 
> __________________________________________________
> To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> 
> For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list
> __________________________________________________