[Rhodes22-list] Triad Trailer brakes and adjustments

[Hank]

Mark,

The Rhodes is built different than most sailboats. The keel is not designed
to hold the weight of the boat.

Hank
On Jun 29, 2016 2:09 PM, "Mark Olson" <Mark-Olson at verizon.net> wrote:

> I just bought a used trailer which I need to fit to the boat.  Your diagram
> is exactly what I need to do it.
>
> I do have a couple questions though.
>
> 1 - In pictures I have seen a center bunk support.  Does your trailer have
> it?  What is the height/location?
>
> 2 - Are measurements center to center.  For example the axle distance from
> the rear of the trailer.  Is the 70" from the rear of the trailer or the
> center of the bunk support?
>
> 3 - Several experienced sailors have told me to put weight on the keel -
> don't let is all rest on the bunk.  But your diagram and pictures show
> there
> is no keel support.  Is this correct - all the weight is on the bunks?
>
> Mark Olson
> Have trailer - next I'm getting a 1983 which has IMF and needs cabin work.
>
>
>
> --
> View this message in context:
> http://rhodes-22.1065344.n5.nabble.com/Triad-Trailer-brakes-and-adjustments-tp52121p52197.html
> Sent from the Rhodes 22 mailing list archive at Nabble.com.
> __________________________________________________
> To subscribe/unsubscribe go to
> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>
> For the list Charter and help with using the mailing list and archives go
> to http://www.rhodes22.org/list
> __________________________________________________
>