[Rhodes22-list] Hull Construction

[Chrissailorman]

my transducer was mounted inside the hull in the lazarette right behind the cockpit wall and a bit off the side of centerline. no hole needed and it worked fine. you can read up on this, I believe it is fairly common.
Chris Greco
sv Blue Hawaii

Sent from my iPad

> On Apr 17, 2017, at 9:30 PM, Peter Nyberg <peter at sunnybeeches.com> wrote:
> 
> No, the Rhodes hull is solid fiberglass, there is no core.  There’s a lot of variation between one Rhodes 22 and the next, but I’m pretty confident that this is universal.
> 
> I drilled a 2” hole in my hull just yesterday to install the thru-hull fitting for a depth/speed/temp transducer.  I did this in the head area because that’s where there was the best vertical clearance.  The hull thickness there was 3/8” of solid fiberglass.
> 
> There will be a YouTube video about this project, but not for a few weeks.
> 
> Peter Nyberg
> Coventry, CT
> s/v Silverheels (1988/2016)
> 
> 
>> On Apr 17, 2017, at 6:31 PM, JP Dempsey <joedempsey at hughes.net> wrote:
>> 
>> I'm planning to install a sounder transducer on my Rhodes. The transom mount
>> that I was thinking about won't clear the  rudder so I'm considering an in
>> hull transducer. I haven't found a source for the hull spec viz. whether the
>> Rhodes hull is a cored construction. Can anyone answer this?
>> 
>> __________________________________________________
>> To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>> 
>> For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list
>> __________________________________________________
> 
> __________________________________________________
> To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> 
> For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list
> __________________________________________________