[Rhodes22-list] Mast Stay and Deck Compression

Graham Stewart gstewart8 at cogeco.ca
Mon Sep 24 16:50:48 EDT 2018


I would not expect that the wood would dry out in a day - or even a week for
that matter if it was soaked through. If possible I would try to remove as
much of the wet wood as feasible and then ensure that what remains is
absolutely dry throughout. I would then inject epoxy into any wood that is
suspect. Otherwise you might just be sealing in the moisture where it will
continue to damage the core. I don't think there are any safe shortcuts to
repair core damage.

Graham Stewart
Agile 1976 Rhodes 22
Kingston Ontario



-----Original Message-----
From: Rhodes22-list [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of
Rick Lange
Sent: Monday, September 24, 2018 4:04 PM
To: The Rhodes 22 Email List
Subject: Re: [Rhodes22-list] Mast Stay and Deck Compression

DJ,

My '93 boat was made using about a foot square solid wood plate under the
mast step.  The plate was glued on three edges to the plywood bow deck
core.  This isolated the plate from the core, preventing dry rot from
spreading from the plate into the core.

Access to the area under the mast step is best from below by pulling down
the cabin liner.  If you have a plate, you can cut it out and replace it.
If you don't then you can cut out the core and make a plate to fit.

It is not a good idea to repair the wood directly supporting the mast step
with epoxy because the mast step screws need to pull out easily during a
mishap.

Regards,

Rick


On Tue, Sep 18, 2018 at 7:26 PM DJBaines <Djbaines05 at gmail.com> wrote:

> <http://rhodes-22.1065344.n5.nabble.com/file/t891/IMG_0221.jpg>
>
> I have a 1983 Rhodes 22 and have encountered cracking at the base of the
> mast. See the attached photo. My best guess is that the wood underneath is
> likely wet and rotten and was no longer able to hold the weight and the
> deck
> couldn't stand the weight and cracked. I imagine that I'll cut out the
> damaged area and repair with fiberglass and epoxy then screw in the mast
> stay screws. Anyone else experience this problem? Do I have the right plan
> to repair? I took the mast down last weekend and want to get it back in
> shape quickly as this is typically a great time to sail in Annapolis. Any
> advice is appreciated.
>
> DJ Baines
>
>
>
> --
> Sent from: http://rhodes-22.1065344.n5.nabble.com/
> __________________________________________________
> To subscribe/unsubscribe go to
> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>
> For the list Charter and help with using the mailing list and archives go
> to http://www.rhodes22.org/list
> __________________________________________________
>
__________________________________________________
To subscribe/unsubscribe go to
http://www.rhodes22.org/mailman/listinfo/rhodes22-list

For the list Charter and help with using the mailing list and archives go to
http://www.rhodes22.org/list
__________________________________________________



More information about the Rhodes22-list mailing list