[Rhodes22-list] Help with motor mount

Steven Alm stevenalm at gmail.com
Tue Nov 17 08:56:39 EST 2020


My boat is a 1990 but probably similar vintage motor lift. The stopper is
only on the starboard side track with is longer than the port side. It is
not through-bolted to the transom and just unscrews. The bolt is covered
with a plastic or composite bushing.

On Mon, Nov 16, 2020 at 9:11 AM Richard Stott <ric at stottarchitecture.com>
wrote:

> Nabble is a PITA
> Here are some pics.
> Westmarine mount is temporary.
> The GB 1-1/4" x 1-1/4" rails are 11 7/8” apart - out to out.
> My new rails will extend past the useless rub rail.
> But -They will not extend past the top of the transom.
> It will be manual.
> The stops are simple 1/4” aluminum bolts at the bottom of the rails.
> More to follow
>
>
> Richard Stott, AIA, LEED AP
> www.stottarchitecture.com
> Office  631-283-1777
> Cell            516-965-3164
>
>
>
>
>
> > On Nov 16, 2020, at 9:48 AM, Cary Tolbert <retiredtoby at gmail.com> wrote:
> >
> > Thanks Rob
> > There is a good reason for asking questions.  The more brains the better.
> >
> > On Mon, Nov 16, 2020, 8:32 AM Lowe, Rob <rlowe at vt.edu> wrote:
> >
> >> Cary,
> >> I don't believe grease on the tracks would be a good idea.  Any grease
> >> would attract and hold dirt, which will just add to the wear.  I think a
> >> spray lubricant such as Sailcoat would be the most you would want to
> use. -
> >> Rob
> >>
> >>
> >> ________________________________
> >> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf of
> >> Cary Tolbert <retiredtoby at gmail.com>
> >> Sent: Saturday, November 14, 2020 4:07 PM
> >> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
> >> Subject: Re: [Rhodes22-list] Help with motor mount
> >>
> >> Thanks Ric. You mentioned, from your survey, that we had the same mount.
> >> The pictures would be really great. If you could give me the
> >> dimensions that would put me in business.
> >>
> >> While I am at it, I have one more question for those on da List. Does
> >> anyone have experience with silicone dielectric grease as lubricant on a
> >> track. I am thinking of  the rails of the motor lift.
> >> Cary
> >> Whisper
> >>
> >> On Sat, Nov 14, 2020 at 3:21 PM Ric Stott <ric at stottarchitecture.com>
> >> wrote:
> >>
> >>> Cory
> >>> The pics I see of the red boat has a motor mount a grade level up from
> >>> mine.  My aluminum rails are attached directly to the hull. There is a
> >>> Delrin (I think) strip that runs on the inside of the channel, bottom
> to
> >>> top. I took some pics and will send them out on Monday if I can.
> >>> Ric
> >>> Dadventure
> >>>
> >>> Sent from my iPhone
> >>>
> >>>> On Nov 14, 2020, at 11:38 AM, Lee Kuhn <lvjkuhn at gmail.com> wrote:
> >>>>
> >>>> The minute I get off the waiting list at your marina I'll pull the
> >>> trigger
> >>>> on getting a recycled one from Stan.
> >>>>
> >>>>> On Sat, Nov 14, 2020, 11:31 AM Cary Tolbert <retiredtoby at gmail.com>
> >>> wrote:
> >>>>>
> >>>>> Thanks Lee. Your boat looks like it was upgraded in its  life. That
> >>> system
> >>>>> is much newer and a better thought out system than the one on my 86.
> >>>>> Rob's 90 something has something similar for his 9.9 hp with all
> >>> electrical
> >>>>> controls.
> >>>>> Any luck on tracking down your Rhodes 22 to be?
> >>>>> Cary
> >>>>>
> >>>>>> On Sat, Nov 14, 2020 at 11:18 AM Lee Kuhn <lvjkuhn at gmail.com>
> wrote:
> >>>>>>
> >>>>>> Gary,
> >>>>>>
> >>>>>> Don't know if any of the attached of my former 1986 AT EASE will
> >> help.
> >>>>>> Might need to enlarge.  Seems like a variety of stops might work.
> >> Good
> >>>>>> luck!
> >>>>>>
> >>>>>> Lee
> >>>>>> No Boat Yet
> >>>>>> Claytor Lake, VA
> >>>>>>
> >>>>>> On Sat, Nov 14, 2020 at 10:16 AM Cary Tolbert <
> retiredtoby at gmail.com
> >>>
> >>>>>> wrote:
> >>>>>>
> >>>>>>> I am asking for help with photos for an 86 Rhodes.  My boat was
> >>>>>>> apparently hit
> >>>>>>> in the marina and I have a damaged motor mount. I was able to
> >> salvage
> >>>>>> most
> >>>>>>> of the damaged parts and replicate them from existing patterns of
> >> the
> >>>>> old
> >>>>>>> parts.
> >>>>>>> However, the LOWER STOPS were missing. So at this point I have no
> >> idea
> >>>>>> what
> >>>>>>> I need to do to replicate these parts. Photos will be very helpful.
> >>>>>>> Measurement would also be greatly appreciated. I am guessing any
> >> boat
> >>>>>> from
> >>>>>>> an 82 to an 89 may have a very similar set up.  Ric I am glad you
> >> can
> >>>>> now
> >>>>>>> send pictures with your computer. You mentioned that we have the
> >> same
> >>>>> set
> >>>>>>> up. What type of material did Stan use for the stops?  Stan said,
> he
> >>> no
> >>>>>>> longer makes this type of mount and cannot furnish parts. So I must
> >>>>> rely
> >>>>>> on
> >>>>>>> your help and my modest skills to be able to sail next season.
> >>>>>>> It must have been a lot of force on the collision as I found three
> >>>>> 1/4
> >>>>>>> inch stainless steel bolts bent to 90 degrees and one bolt was
> >> sheared
> >>>>>> into
> >>>>>>> two pieces.
> >>>>>>>
> >>>>>>> Thanks for your help,
> >>>>>>> Cary Tolbert
> >>>>>>> S/V Whisper "86
> >>>>>>> Radford, VA
> >>>>>>>
> >>>>>> -------------- next part --------------
> >>>>>> A non-text attachment was scrubbed...
> >>>>>> Name: Motor Lift Side.jpg
> >>>>>> Type: image/jpeg
> >>>>>> Size: 1770484 bytes
> >>>>>> Desc: not available
> >>>>>> URL: <
> >>>>>>
> >>>>>
> >>>
> >>
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20201114/c7f75d52/attachment.jpg
> >>>>>>>
> >>>>>> -------------- next part --------------
> >>>>>> A non-text attachment was scrubbed...
> >>>>>> Name: Motor Lift Top.jpg
> >>>>>> Type: image/jpeg
> >>>>>> Size: 1804873 bytes
> >>>>>> Desc: not available
> >>>>>> URL: <
> >>>>>>
> >>>>>
> >>>
> >>
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20201114/c7f75d52/attachment-0001.jpg
> >>>>>>>
> >>>>>> -------------- next part --------------
> >>>>>> A non-text attachment was scrubbed...
> >>>>>> Name: Motor Lift Side Top.jpg
> >>>>>> Type: image/jpeg
> >>>>>> Size: 1845462 bytes
> >>>>>> Desc: not available
> >>>>>> URL: <
> >>>>>>
> >>>>>
> >>>
> >>
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20201114/c7f75d52/attachment-0002.jpg
> >>>>>>>
> >>>>>>
> >>>>>
> >>>
> >>
>
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0648.jpg
Type: image/jpg
Size: 1942916 bytes
Desc: not available
URL: <http://rhodes22.org/pipermail/rhodes22-list/attachments/20201117/5e697346/attachment.jpg>


More information about the Rhodes22-list mailing list