[Rhodes22-list] Restrainer location for UPS

[Kroposki]

Mary Lou,
	Don't forget to take pictures.
                   Ed K
-----Original Message-----
From: Mary Lou Troy [mailto:mltroy at netreach.net] 
Sent: Friday, April 18, 2003 5:22 PM
To: The Rhodes 22 mail list
Subject: Re: [Rhodes22-list] UPS Delivery-FYI

Mark,
We are planning on splitting the distance between the bottom of the 
masthead fitting and the top of the steaming light for placement of the 
halyard restrainer. That would be about 4" above the light and 4" below
the 
base of the masthead fitting. Hoping that will be far enough away from
the 
roller furler to be effective. I had a picture of the set-up at Atlantic

City. Paul took a look at it then and thought there would be room. We'll

see. You must have gotten the super deluxe model of restrainer. Ours is 
simply a small eyestrap. We may have different steaming lights too. Ours

has a squared base (against the mast) but all the other edges are
rounded. 
We launch next week so the restrainer gets mounted in the next few days.

Mary Lou


At 03:48 PM 4/18/2003 -0400, you wrote:
>Mary Lou,
>
>Same here. And there are some square edges on it so you can't really
place
>the restrainer above or below w/o chafing. So I just moved it and
covered
>old the hole w/ the halyard restrainer. The UPS fits nicely and there's
no
>danger of halyard wrap. I wouldn't advise going much more than 12-14"
below
>the masthead or you may not be able to tension the luff of the UPS
>sufficiently.
>
>The restrainer Paul sent to me was one he had sitting on his desk - I
think
>it's a bit different than the Harken one, but I don't think that
matters
>much. It came with a little plastic strip cut to fit to place between
the
>stainless halyard restrainer and the aluminum mast - it covered the old
>steaming light hole nicely.
>
>Mark
>
>
>----- Original Message -----
>From: "Mary Lou Troy" <mltroy at netreach.net>
>To: "The Rhodes 22 mail list" <rhodes22-list at rhodes22.org>
>Sent: Friday, April 18, 2003 3:27 PM
>Subject: Re: [Rhodes22-list] UPS Delivery-FYI
>
>
> > Thanks for checking, Jay. I just sorta figured they'd be coming soon
>seeing
> > as how Mark got his.
> >
> > We've installed the padeye. Halyard restrainer is next. Trying to
figure
> > out the positioning for that. We have the steaming light about 10
in.
>below
> > the masthead.
> >
> > ML
> >
> >
> > At 12:47 PM 4/18/2003 -0400, you wrote:
> > >Folks,
> > >If you haven't yet checked on delivery, I spoke to Paul at Doyle
today.
> > >All, obviously except for Mark who has some kind of leverage, are
>awaiting
> > >the luff line. This should be done by next week, when he
anticipates them
> > >all shipping.
> > >
> > >Aaah, the rites of Spring!
> > >jay
> > >
> >
> >