[Rhodes22-list] Weather and lee helm

[Jim Connolly]

Michael,

Jib is a new (2003) 135%.  Main is new ('03) IMF Mk II with the vertical
batten.

Jim Connolly
s/v Inisheer
'85 recycled '03 

-----Original Message-----
From: rhodes22-list-bounces at rhodes22.org
[mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of Michael Meltzer
Sent: Saturday, August 14, 2004 11:24 PM
To: The Rhodes 22 mail list
Subject: Re: [Rhodes22-list] Weather and lee helm

sight you mast, and measure the center using the toping lift taking it to
"symmetrical" stop on either side of the boat, it should be the same
distance(actually a little to port because you are using the port sleeve).
Are you using a 175? or a large sail? the big guys loose all shape when
reefed and become wind grabers.

MJM



----- Original Message -----
From: "Jim Connolly" <jbconnolly at comcast.net>
To: "'The Rhodes 22 mail list'" <rhodes22-list at rhodes22.org>;
<rhodes-list at sailnet.net>
Sent: Saturday, August 14, 2004 9:44 PM
Subject: [Rhodes22-list] Weather and lee helm


> Ahoy list,
>
> While out today in some gusts, I buried the rail a couple of times and
> decided it would be a great time to try reefing and balancing the boat.  I
> did not achieve balance.  What I did achieve was some pretty good lee helm
> on starboard tack, and slightly less weather helm on port tack.  It wasn't
> my imagination.  I trimmed the sails in and out on both port and starboard
> tack for several tacks, and it was repeatable.  The traveler was on the
> centerline.  Foot of mainsail was tight.  Topping lift was loose.  Jib was
> furled to about 100% (clew just aft of forward lower shrouds).
>
> All the way home, I tried to visualize what might cause this.  My
intuition
> fails me.  Any ideas?
>
> Jim Connolly
> s/v Inisheer
> '85 recycled '03
>
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>

__________________________________________________
Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list