[Rhodes22-list] Repair Question

[Roger Pihlaja]

----- Original Message -----
From: "Bob Weber" <ruba1811 at hotmail.com>
To: <rhodes22-list at rhodes22.org>
Sent: Wednesday, March 09, 2005 1:50 PM
Subject: [Rhodes22-list] Repair Question


> Hi all, I and doing a bottom job to Ruba and while I am at it I am going
to
> repair the centerboard and rudder.  There is a notch out of the leading
edge
> of the centerboard where it contacts the trailer and I noticed that I am
> missing a corner of the bottom where it was functioning as "Depth gauge".
I
> want to repair the 2 inch notch out of the leading edge for sure and
> possibly just seal and reinforce the area of the "depth gauge" if not
build
> it back to a square corner.   I am a fibreglass rookie and would like any
> advice on surface preparation, products, and application if there are any
> experts out there.  Lastly I would like to get this job done this weekend
> but the Wx is calling for 40 degrees with good chance of rain (humid at
the
> least).  How does weather effect this job?  Thanks in advance.  Bob Weber
>
>
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>
>