[Rhodes22-list] Electrical Question

[Rob Lowe]

Bob,
Not familiar with your system.  Did you check out the individual fuses?
Pull them out and look at them or even test them with the ohm meter part of
your volt meter.  I'm thinking the indicator lights will work even if the
fuse itself is bad. - Rob

----- Original Message ----- 
From: "Bob Weber" <ruba1811 at hotmail.com>
To: <rhodes22-list at rhodes22.org>
Sent: Monday, July 17, 2006 2:43 PM
Subject: [Rhodes22-list] Electrical Question


> Hi all, Mabey someone can help me with a mystery.  My switch panel stopped
> working.  When I looked at it one of the bars fell completely off, so I
> figured that was the problem and bought a new one.  I got the exact same
> kind (4 switch sea dog) .  I installed the new one yesterday and it
doesn't
> work either.  I volt metere says I have power at the panel I lights on the
> switches illuminate when on but none of the lights / depth sounder work.
It
> was 100 degrees and I tried a fussed around for about an hour and then
quit.
>   Does anyone have any idea what I might have done wrong?  Thanks in
> advance.  Bob Weber
>
>
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list