[Rhodes22-list] Hunting

Bill Effros bill at effros.com
Thu May 25 19:46:20 EDT 2006


Andrew,

Justin knows what he's doing.

There can be a 9 foot tidal variation around here.  If you and Elton 
tied up at High Tide (which you probably did because that's the best 
time to launch the boat) and low wind, the mooring line can seem very 
short.  Justin uses monster sized chain which will drop straight to the 
bottom when there's little windage on your boat.  In high tide, low 
wind, the first 9 feet of mooring line will follow the chain to the 
bottom, so you will seem to be very close to the mooring ball.

But if there's a strong blow, the wind will push your boat back, and 
stretch both the chain and the mooring line 15 to 18 feet back from your 
apparent location at high tide/low wind.  This will give you excellent 
scope on your huge mushroom anchor which is buried in the mud.

The only thing you have to watch for is your chain wrapping around the 
stem of the mushroom anchor.  Dive on it, or maneuver your boat directly 
above and unwind it if it is wound.  Do this at low tide when you can 
see what's going on, and get leverage above the anchor.

The mooring ball, before you regularly have your boat on it, can blow in 
such a way that it wraps the chain around the stem.  This doesn't tend 
to happen once you regularly attach you boat to the ball--even if the 
boat hunts a lot.

Bill Effros

andrew collins wrote:
> Bill & Bruce -
>
> After more observation it seems that a small planing v-hull motor boat
> nearby has very similar behavior. The R22 hull per GBI brochure is a
> semi-displacement hull, whatever that means. The motor boat has similar
> hull, but more windage due to the cabin.
> The deep keel on the bigger sails seems like the stabilizer here. 
> Yesterday
> evening was clamer, but as we all know, contrary to what the marine
> contractors tell you,  the boats in the mooring field were not all 
> lined up
> in the same direction.
>
> The winds at the mooring are definitely influenced by the nearby 
> upwind tree
> ( the wind was out of the NW these last days), nearby buildings, the 
> point
> itself, etc. creating turbulence. The mooring was put in by Justin of Old
> Greenwich Marine
>
> Upon mooring the boat for the first time Elton and I both felt the 
> pendant
> to be too short. There is also a heavy loop off of the mooring ball to 
> which
> I tied the slack line leading to the bow eye. It is independent of the
> pendant. Bruce is this what you call the bridle? It does look like one.
>
> Per Bill's advice I will:
>
> First try number 2, observe the results, and then try number 1 by 
> switching
> the slack line to the center cleat, and put the pendant on the bow eye 
> with
> a snap shackle. Should a thimble be in the pendant eye?
>
> A science experiment!
>
> Andrew
>
>
> On 5/25/06, Bill Effros <bill at effros.com> wrote:
>>
>> Andrew,
>>
>> I haven't tried this, because I come from the "If it ain't broke, don't
>> fix it" school, but I believe there are 2 things you might try to lessen
>> hunting:
>>
>> 1.  Moor from your bow eye instead of your bow cleat.  (Put a slack back
>> up on the bow cleat.)
>>
>> 2.  Loop a line from the bow cleat, over the port side, through your
>> mooring line eye, and back over the bow cleat from the starboard side.
>> They recommend this for bare boats in the BVI to lessen hunting, and
>> reduce chafing.
>>
>> Chafing has been a zero problem for me over the 8 years my Rhodes has
>> been on a mooring in Greenwich Cove.
>>
>> I have a chafe guard over my mooring line where it rubs on the rub
>> rail.  I have never even thought about replacing the chafe guard because
>> it does not chafe.
>>
>> I spend a lot of time on my mooring in my boat, and it does not hunt
>> very much.  Sometimes on anchor it hunts much more.  Part of it is where
>> your boat happens to be.
>>
>> Bill Effros
>>
>>
>> R22RumRunner at aol.com wrote:
>> > Andrew,
>> > It's what is called hunting as others have stated. It is a common
>> trait  with
>> > the R22 on a mooring. It's caused by a combination of things inherent
>> with
>> > the R22 design, not a flaw.
>> > I don't know of any sure cure for this.
>> >
>> > Rummy
>> > __________________________________________________
>> > Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/li
>> >
>> __________________________________________________
>> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>>
>
>
>


More information about the Rhodes22-list mailing list