[Rhodes22-list] Compression Repair and Addition of Compression Post

Lowe, Rob rlowe at vt.edu
Thu Feb 5 09:57:29 EST 2009


Dave,
Nice job!  Thanks for taking the time to document for the rest of us. -
rob



-----Original Message-----
From: rhodes22-list-bounces at rhodes22.org
[mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of David Culp
Sent: Thursday, February 05, 2009 12:49 AM
To: rhodes22-list at rhodes22.org
Subject: [Rhodes22-list] Compression Repair and Addition of Compression
Post

This is a link to a web page discussing the compression repair I just
did on
my 1998:
http://r22repair.hsbtx.net

It is easier to tell the story using a web page then trying to add
photos at
the end of a post.  I am throwing this out there for people who may be
faced
with a similar situation.  I understand now that Stan has a compression
post
kit made out of stainless.  That might be the way to go, but I had the
boat
out of the water and this is the way I did it based on recommendations
from
the boatyard.  So far, quite pleased with the results.  I guess the
obvious
question is... does it interfere with going into the head.  The short
answer
is "no" not really, though there is a bit less room to squeeze by.  It
actually looks rather "salty" and the stain color matched the interior
pretty well.

David
__________________________________________________
To subscribe/unsubscribe or for help with using the mailing list go to
http://www.rhodes22.org/list
__________________________________________________



More information about the Rhodes22-list mailing list