[Rhodes22-list] Rob Lowe Mast light wiring

[Joe Camp]

Rob:
 
The insulation trick seems good.  I will ot need to fully wire the mast light, though. Still, I was considering using several wire ties with the long tails left uncut spaced every four or so feet to keep the wire from klanking.  Happy winterizing.
 
Joe 


>________________________________
>From: Rob Granger <rgranger at sbc.edu>
>To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
>Sent: Sunday, October 23, 2011 8:21 PM
>Subject: Re: [Rhodes22-list] Rob Lowe Mast light wiring
>
>Hey Joe
>
>It must be a trick of the photo.  I only have one set of wires running up
>the mast to an all around anchor light that doubles as a steaming light.
>
>Good luck with your wiring.  One other trick I learned....  If you take some
>of that pink foam board you can find a Home Depot and cut it into 1" by 8'
>strips and then duct tape the strip ends together... then tape your wire to
>the foam strips... and jam that up your mast along with the your wire, The
>wire won't slap inside your mast and make that anoying clang clang clang at
>anchor.
>:-)
>On Sun, Oct 23, 2011 at 2:01 PM, Joe Camp <jjcampjr at yahoo.com> wrote:
>
>> Rob:
>>
>> Thanks for the photo.  It looks as if you have two feeds out of the mast.
>>  Since there are two sets of two tires, I wonder: Do you have two lights
>> aloft?
>>
>> My connection is older, brass and just two wires.  I have only an anchor
>> light at the top of the mast, no cruising light at the spreaders. Since
>> Rummy said that it doesn't matter how they're attached, my query is now
>> senseless.  If there are problems, I will invite you to fire sale.
>>
>> Joe
>>
>>
>>
>>
>__________________________________________________
>To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>
>For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list
>__________________________________________________
>
>
>