[Rhodes22-list] Cleat for CB Pendant

The Rhodes 22 Email List rhodes22-list at rhodes22.org
Thu May 21 08:40:07 EDT 2015


Jay:
Mine is just held on with screws. If the screws have just wiggled loose
larger screws should do the trick. You might want to check that the cleat is
sitting flat on the surface. There is very little force applied to the cam
cleat.

Graham 



-----Original Message-----
From: rhodes22-list-bounces at rhodes22.org
[mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 Email
List
Sent: May-20-15 10:00 PM
To: The Rhodes 22 Email List
Subject: [Rhodes22-list] Cleat for CB Pendant

As everybody seems to be shaking off a long winter, I had a last minute
question before launch. 

My cam cleat at the companionway for the CB pendant is rocking. Is there any
easy fix for that (larger screws?), or a full epoxy fill & retap for machine
screws? Not sure if it's just the fiberglass single thickness holding
tapping screws, or if I can get locknuts from below for machine screws? Any
help on that is welcome.

Jay Friedland
S/V Wanderlust '97
__________________________________________________
To subscribe/unsubscribe go to
http://www.rhodes22.org/mailman/listinfo/rhodes22-list

For the list Charter and help with using the mailing list and archives go to
http://www.rhodes22.org/list
__________________________________________________



More information about the Rhodes22-list mailing list