[Rhodes22-list] Diamond Board

[The Rhodes 22 Email List]

Jerry -- On second thought, maybe I can tie the pump into the existing aux
switch. The aux is for the cigarette lighter which I've never used.
Thoughts?

On Thu, Oct 1, 2015 at 9:36 AM, Steven Alm <stevenalm at gmail.com> wrote:

> Rob -- I've never seen a photo of the board removed and so I really didn't
> know what I'd find. I was pleasantly surprised at the engineering of the
> slots for the pin and how easily it all lifts out. Using the wire loop
> method was genius if I do say so myself  8-)  Not that I ever want to do
> this job again!
>
> Jerry -- Crimp connectors noted. Good thing you couldn't see how the bilge
> pump switch is mounted, you'd flip! Totally jury-rigged. But now that I
> have everything all opened up, this would be a good time to wire it all the
> way back to the breaker panel in the companionway. All the switches on the
> panel (cabin lights, steaming light, running lights, aux) are all lighted
> switches. Not sure if I could match those with another one for the pump.
> I'd probably just drill a hole and install a simple SPST toggle. My
> electrical skills are pretty basic.
>
> On Thu, Oct 1, 2015 at 8:13 AM, The Rhodes 22 Email List <
> rhodes22-list at rhodes22.org> wrote:
>
>> Slim,
>> Thanks for the photos.  Looks like a pretty clean setup.  The pin looks
>> to be in pretty good shape. These photos will become part of the archives.
>> - Rob Lowe
>>
>>
>>
>> __________________________________________________
>> To subscribe/unsubscribe go to
>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>>
>> For the list Charter and help with using the mailing list and archives go
>> to http://www.rhodes22.org/list
>> __________________________________________________
>>
>
>