[Rhodes22-list] ST1000 installation

Chris Cowie ccowie at cowieassociates.com
Fri Feb 17 12:27:12 EST 2017


I have the same set up and it works great, I use it all the time.  My power cord connects to a power source located below the bench thru the vertical lazaret wall so it is out of the weather and has less cord than the power source in the coming.  I don't have the remote transmitter and don't see the need for it.

Christopher P. Cowie    

4400 MacArthur Blvd, NW
Suite 300
Washington, DC 20007
202.342.2711 ex.204 ● 202.342.2691 fax ● 202.270.1470 mobile
[ccowie at cowieassociates.com]



Please consider the environment before printing this email.

-----Original Message-----
From: Rhodes22-list [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of peter at sunnybeeches.com
Sent: Friday, February 17, 2017 12:22 PM
To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
Subject: Re: [Rhodes22-list] ST1000 installation

I did this last summer.  You probably already have Bill Wickman's PDF that shows how did it, but just in case, I'll attempt to attach a copy.

With this in hand, the installation went smoothly.

Bill states that in the place where he drilled the hole for the pin the fiberglass was thick enough that no additional bracing was needed.  
  On my boat the fiberglass was less than 1/4" thick at that location, so I backed it up with a 3/4 block of wood epoxied in place.

Also, at the place where you drill the hole the fiberglass is not quite horizontal.  Drill the hole perpendicular to the surface rather than vertical.  This will make the top of the pin sit flush, which will look better.

I think you'll enjoy your new toy.

Peter Nyberg
Coventry, CT
s/v Silverheels (1988/2016)




Quoting Michael Weisner <mweisner at ebsmed.com>:

> With warm weather predicted for the northeast this weekend I will be 
> removing the cover tarp and starting some of my projects on my Rhodes 
> 22 such as the installation of a ST1000 Tiller Pilot from Santa.  Has 
> anyone had any issues with the installation?
>
>
>
> Mike
>
> s/v Wind Lass ('91)
>
> Nissequogue River, NY
>
>
>
>
>
>
>
> __________________________________________________
> To subscribe/unsubscribe go to
> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>
> For the list Charter and help with using the mailing list and archives 
> go to http://www.rhodes22.org/list 
> __________________________________________________

-------------- next part --------------
A non-text attachment was scrubbed...
Name: TillerPilotSetuponRhodes22.pdf
Type: application/pdf
Size: 786461 bytes
Desc: not available
URL: <http://rhodes22.org/pipermail/rhodes22-list/attachments/20170217/98505c2d/attachment.pdf>
__________________________________________________
To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list

For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list __________________________________________________


More information about the Rhodes22-list mailing list